lil SOLID Ez

lil SOLID Ez is a simple to use one-piece device to enjoy heated tobacco experience without the hassle of ash, smoke or cigarette smoke smell.

It heats tobacco from the inside by a stainless-steel pin for consistent tobacco experiences.

With lil SOLID Ez you will enjoy:
- Consistent heated tobacco experiences, with 3 back-to-back consecutive uses
- 20 to 25 experiences on a single charge*
- 5 minutes duration of one session

Available in 5 new colours: white, blue, mint, rose gold and black.

lil SOLID Ez is designed to be used only with specialy designed tobacco sticks.

* Subject to battery performance degradation and conditions of use.

lil SOLID Ez and lil SOLID 2.0 - are both alternatives to cigarette smoking.
lil™ SOLID Ez is the next generation of lil™ SOLID 2.0 all-in-one tobacco heating device introduced by IQOS™

What’s new:
1. Heating technology – resistive heating with a pin
2. New device finishing - glossy finish
3. New 5 colors: rose gold, mint, white, black and blue
4. Smaller & lighter – 78.9 gr for lil SOLID Ez vs 98.8 gr for lil SOLID 2.0
5. New additional cleaning tool – lil SOLID Cleaner Pro, for cleaning the cap and around the pin. Sold separately.

The serial number of lil SOLID Ez is displayed under the cap of the device.

Both devices – lil SOLID Ez and IQOS ORIGINALS - are tobacco heating systems and heat tobacco from inside. However, there are some differences:

IQOS ORIGINALS
Iconic
- Portfolio of devices & colors, stylish accessories to customize your device
- Blade heating technology


lil™ SOLID Ez Introduced by IQOS™
Simple and affordable
- Simple & robust design, device in 5 colors & basic accessories
- Pin heating technology

With both technologies you can enjoy the taste of the real tobacco without fire, smoke and ash.

It is your own preferences, goals and budget that define your choice.

Whether you choose lil™ SOLID Ez or IQOS ORIGINALS, they are both smoke-free products and a better choice than continued smoking.

Important information: they both are not risk free and provide nicotine which is addictive.

You receive the new device in sleep mode. To wake up the device, press the button for 2 seconds or connect the charger to the charging port.

Once the device is activated, the Status LED blinks in ice blue for one second and vibration occurs twice, simultaneously.

We recommend to fully charge your new Iil SOLID Ez device with the supplied AC Power Adaptor before using it. It takes up to 2 hours. 

Slide and open the cover of the stick insertion part at the top of the device and insert a tobacco stick with the tobacco part of the stick facing down.

Press the stick until it touches the bottom of the stick insertion part. 

To start your device, press the button for 2 seconds until vibration occurs.

Preheating will last for about 25 seconds. The duration time of the preheating process can vary according to the use environment.
When the preheating process ends, the Status LED lights illuminate, and vibration occurs simultaneously. The stick is ready for use.

To signal the last 30 seconds of the session or the last 3 puffs, whichever comes first, the device will vibrate once and the Status LED will blink in ice blue until the end of the session. At the end of the session, the Status LED and the device turn off automatically. You do not need to press the Button.

Remove the tobacco stick after the end of the experience:
Rotate the stick to one direction 3 times or more and pull the stick out of the device. 

Close the cover of the device to prevent any foreign particles from entering.

You may use the device up to 3 consecutive times without waiting time.

After 3 consecutive uses (within 18 minutes) the device will cool down automatically. Please wait. It will take 3,5 minutes before you can use another tobacco stick.

To check the charge level of lil SOLID Ez, short press the button or plug the device in a power outlet using the supplied USB Cable and AC Power Adaptor. The Status LED light will indicate the current charge level of your device.

Although Iil™ SOLID device does not require a full charge to work, we recommend to fully charge it before the first use.

To reset your lil SOLID Ez, press the button for 8 seconds, even if vibration occurs within 2 seconds. The State LED will blink twice in red, orange, ice blue and blue, sequentially.

The device is completely reset when the State LED lights blinks in ice blue for 1 second, and vibration occurs twice, simultaneously.

It is important to keep your device clean from any foreign particles, remnants or dust. For this, please, keep the lid closed at any time after the use. For optimal experience, clean your device after every 20 uses.

You can clean your lil SOLID Ez in three ways: with a Dual Cleaner (comes with the device), by cleaning with heat* or with a lil SOLID Cleaner Pro (sold separately).

Cleaning with the Dual Cleaner:
To use the Cleaning Wiper, gently snap open the side with the ⊙ (circle) mark.
To use the Cleaning Brush, gently snap open the side with the (multiple dots) mark.
Remove the cap from the cooled device and insert the Cleaning Wiper into the heating chamber and clean by spinning the wiper.
Insert the Cleaning Brush into the heating chamber and clean by spinning the brush.


Cleaning with Heat*:
To clean with heat, quickly press the button 5 times (within 2 seconds). The State LED will blink orange for 90 seconds and the cleaning process happens automatically
When the cleaning process ends, the State LED automatically goes OFF, and vibration occurs 2 times
* Cleaning with heat means heating the remnants stuck to the heater. The heater can get very hot, so do not let anything come into contact with the heater during or immediately after cleaning with heat.

Cleaning with lil SOLID Cleaner Pro:
This new cleaning tool is efficient to remove hard tobacco residue that cumulate around the pin and inside the cap It also allows to restore the delivery of aerosol like a new device.

Use the cleaning wiper (the side with the “hole”) to clean around the pin:
1. remove the cap
2. insert the cleaning wiper in the heating chamber
3.rotate several times to remove the crust.
Use the cleaning “brush” (the side with the protruding pin) to clean the cap:
1. insert the cleaning tool from the bottom of the cap
2. rotate several times
To reduce residual tobacco smell after removing hard particles, use the cleaning sticks.

Solid red light for 2 sec with two vibrations -> low battery
Please charge your device

Red light blinks 5 times -> device malfunction
Reset the device by pressing the button for 8 seconds, even if vibration occurs within 2 seconds.

Orange light blinks 3 times -> device needs to cool down or exceeds operating temperature range
After 3 consecutive uses (within 18 minutes) - an orange light indicates that the device needs to cool down. The device will be put in the cool down mode automatically. Please wait. It will take 3,5 minutes before you can use another stick.
It could also indicate that the temperature has gone beyond the operating temperature 0~40℃.

Orange light blinks 2 times -> liquid ingression
Please do not use the device and dry it until the light stops blinking.
If the light does not stop blinking, please, contact us at Customer Support Center 0800 2 12 12 or visit us at the nearest IQOS zone.

Blinking green light and device not responding -> device in updating mode
To interrupt the update process, disconnect the device from the power source

The lingering smell most probably comes from the non-regular or non-thorough cleaning. We recommend cleaning the device on a regular basis after using 1 pack of tobacco sticks.

If you continue to use the device without removing the debris or remnants, the device can heat up the remnants, which can produce the lingering smell [link to How to clean lil SOLID Ez?

No. Cigarettes cannot be used with lil SOLID Ez device because of different manufacturing design. Special tobacco sticks have been specifically designed for use with lil SOLID Ez device.

lil SOLID Ez has been designed to have an average stick duration similar to cigarettes. However, there is still a difference because lil SOLID Ez is a heated tobacco product.  The way you puff impacts how long your tobacco stick will last.

What you experience with lil SOLID Ez is the taste of a real tobacco, which is heated, but not burned. Tobacco sticks are made from a specially selected blend of tobacco in order to provide tobacco taste satisfaction that replicates as much as possible what adult smokers expect.
By heating the tobacco, instead of burning it, the taste released is less harsh than what you are used to with a cigarette. That’s why the taste is different.

If you experience any difficulties inserting tobacco sticks, please, check the following:
1. Check if you are using the tobacco stick and not any other product
2. Check if  there are any remnants inside the stick insertion part. Remove the remnants by pulling the cap out of the device, install the cap back and try to insert the stick again.
3. Don’t forget to twist the tobacco stick more than 3 times in one direction before pulling the stick out of the device. This way you avoid remnants in the stick insertion part.
4. Check if you insert the stick in the right direction. Insert the tobacco stick with the tobacco part facing down. If it is inserted upside down, you may experience difficulties inserting it. 
5. If a stick gets broken in the device, please, remove the broken stick:
• Pull out the cap and the broken stick should come with it. Then, gently tap the cap to remove the broken part.
• If this does not happen, with caution, try using a toothpick to remove the part of the stick that remains in the device.
• do not use any sharp tools to remove the broken stick as you might damage the device. 
• do not insert any metal into your device.
• if you are experiencing any trouble, please go to your nearest IQOS store so that one of our agents can assist you. 
6.Check if  the tobacco sticks were exposed to a humidity or high temperature. They need to be kept in a dry place to prevent the tobacco mix from sticking together. Try a new stick from the pack that was not exposed to humidity.
7.If none of the above solutions helps, contact us at Customer Support Center 0800 2 12 12 or visit us at the nearest IQOS zone.

If you have not used the device for a long period of time, please ensure there is no visible damage present and then, try to charge it fully before attempting to turn it on.

To conserve battery life, the device will return to sleep mode:
1. if it is not charged for 24 hours when the Status LED light is red
2. if it is not used for 7 days when the Status LED light is orange, ice blue, or blue

Please note, when you start charging the battery after a long period of inactivity, i.e. when your battery has been completely depleted, the charging lights may not appear right away. This is a normal process.

If the charging does not happen, please, contact our Customer Support via:
o phone: 0800 2 12 12
o e-mail: contact.ba@iqos.com
o visit IQOS zone

For optimal charge, use a supplied AC Power Adaptor and Charging cable.
Please ensure you use the right charging method. We recommend charging only with the USB Cable and AC Power Adaptor designed for lil™ SOLID. Only 5V 2A chargers will support optimal charging. If you use other types of chargers, such as smartphone chargers, car phone chargers, or portable power banks, may cause low charge efficiency or reduced battery life.

Foreign particles may cause poor connectivity between the device and the AC Power Adaptor. To ensure the connectivity between the USB connections, please, ensure that they are clean both on the device and the AC Power Adaptor.

If you experience that you only get a little bit of aerosol compared to your previous experiences, please ensure you check the following:

• You are using the tobacco stick designed for lil SOLID Ez and not any other brands or products
• You have correctly inserted the tobacco stick in lil™ SOLID Ez device without breaking or turning the tobacco stick
• Check if there are any remnants inside the stick insertion part. Remove the remnants by pulling the cap out of the device, install the cap back and try the new stick.
• You allow the device to pre-heat for about 25 seconds prior to puffing
• You clean your lil™ SOLID Ez regularly (every 20 sticks)
• You pause between puffs to allow the pin to properly heat the tobacco and generate aerosol

You can also bring your Iil SOLID Ez into your nearest IQOS zone for a free Complete Service periodically.

A comprehensive professional lil device maintenance service performed in IQOS store
Every check-up is carried out to help you to keep the lil device in optimal condition for longer and to ensure a satisfying lil experience.

This service is free of charge.

What services are included Complete service?

RTD (Resistance to draw) machine test*
Test for device capability to deliver the aerosol with each puff.

Professional device cleaning
Cleaning of the device, including the pin and the cap, remove any tobacco residue to improve the airflow and heating process for an optimal and satisfying taste experience.

Firmware upgrade
Upgrade to the latest firmware to ensure the best possible performance of your lil device.

Yes, you can still get support, even if the device is discontinued, according to the warranty terms and conditions.